Code Alarm CA650 Manual do Utilizador descarregar pdf (Página 4)

Feature Bank 6 - 8 Chirps 1 LED Flash 2 LED Flashes 3 LED Flashes 4 LED Flashes

Security Features ON OFF

Engine Checking Tach Voltage Crank Time Only DBI Port

Crank Time 1- Flash 0.6 Sec 2- Flash 0.8 Sec 3-Flash 1.0 Sec 4-Flash 1.2 Sec

5-Flash 1.4 Sec 6-Flash 1.6 Sec 7-Flash 1.8 Sec 8-Flash 2.0 Sec

9-Flash 3.0 Sec 10-Flash 4.0 Sec

Hi/Low Engine Check Low High

Shock Sensor Testing ON OFF

Note: Defalut settings are in BOLD print

CA650 - Programming Guide, Continued

SETUP & PROGRAMMING

Transmitter Programming (3 Chirps/Parking Light Flashes)

1. Turn the ignition ON.

2. Press and hold the valet/override button.

3. Within 10 seconds the system will chirp/flash the parking lights (3) three times, release the button.

4. Press Button 1 of each transmitter you wish to program.

5. The system will respond with 1 chirp for each accepted transmitter.

6. Pressing the override button at anytime during programming will advance to the next bank.

Note: This system has 1 button programming which programs all channels of the system.

Note: Transmitter programming will exit after 15 seconds or if the ignition is turned OFF, the system will

sound (3) three long chirps and flash the parking lights (3) three times to confirm exit.

Manual Feature Bank Programming 2 - 6 (4-8 Chirps/Parking Light Flashes)

1. Turn the ignition ON

2. Press and Hold the valet/override button.

3. Within 10 Seconds the system will chirp/flash the parking lights (3) three times, release the button.

4. Use the valet/override button to advance through each option bank. For feature programming advance

to Feature Bank 2 through 6 which is four to eight chirps/parking light flashes.

5. Use the transmitter "STAR" button to scroll through the selections in each feature bank, the siren/

horn will chirp and the parking lights will flash to indicate each feature.

6. Press the transmitter LOCK button to change the desired feature. The LED will flash indicating the

changed feature.

7. Continue changing desired features or turn ignition OFF to exit programming.

NOTE: Pressing UNLOCK at any point during programming will DEFAULT ALL FEATURES and

return you to bank 2 (4 chirps).

NOTE: The system will remain in feature programming mode as long as the ignition is on, there

is no time limit. To exit programming turn the IGNITION OFF.

1 2 3 4 5 6 7 8 9 ... 20 21

Sem comentários

Code Alarm CA650 Manual do Utilizador Página 4