
4. 8 PIN INPUT HARNESS
Instant Trigger Input (BLUE/WHITE)
This wire is a GROUND input for an external sensor or secondary pin switch.
Verification: This wire when connected will trigger the security system
Negative Door Input (GREEN)
Locate the vehicle’s dome light or door pin switch wire.
Verification: This wire will register ground (NEG) when the door is opened and the interior light is on.
This wire will register positive voltage when the door is closed and the interior light is off.
Connect the GREEN wire to the vehicle’s negative door input wire(s).
NOTE: Certain vehicles may require multiple connections. Refer to vehicle application guide
Positive Door Input (PURPLE)
Locate the vehicle’s dome light or door pin switch wire.
Verification: This wire will register positive voltage(POS) when the door is opened and the interior light is
on. This wire will register ground or "0" Volts when the door is closed and the interior light is off.
Connect the PURPLE wire to the vehicle’s positive door input wire(s).
NOTE: Certain vehicles may require multiple connections. Refer to vehicle application guide
External Start Trigger (-) (WHITE/BLUE)
NOTE: The following connection is only required on a REMOTE START installation
This wire will activate the Remote Start when a GROUND pulse is applied to it from an external device.
Hood Pin Input / Negative Shutdown (-) (GRAY)
Install a Hood Pin Switch and connect to the GRAY wire. This connection is required for Remote Start.
Verification: This wire when connected will register ground when the vehicle's hood is opened.
Connect the GRAY wire to the hood pin.
Note: Be sure to loom the wire, and seal the grommet.
Nuetral Safety Input (-) Input (BLACK/WHITE)
The BLACK/WHITE nuetral safty input wire to the nuetral safty wire of the vehicle or an optional toggle
switch. This wire must see ground for the remote start feature to operate.
11
Comentários a estes Manuais