9
2. 16 PIN MAIN HARNESS CONTINUED
Manual DISARM Input (BROWN)
This wire will DISARM the security system when a POS or NEG pulse is applied to it from an external device
such as the vehicle's factory unlock motor wire.
Ground When Armed Output (-) 500mA (ORANGE)
This wire will show Ground when the system is Armed. This wire is used for controlling window modules or
additional sensors.
Positive Door Input (+) (PURPLE)
Locate the vehicle’s dome light or door pin switch wire.
Verification: This wire will register positive voltage (POS) when the door is opened and the interior light is
on. This wire will register ground or "0" Volts when the door is closed and the interior light is off.
Connect the PURPLE wire to the vehicle’s positive door input wire(s).
NOTE: Certain vehicles may require multiple connections. Refer to vehicle application guide
Negative Door Input (-) (GREEN/VIOLET)
Locate the vehicle’s dome light or door pin switch wire.
Verification: This wire will register ground (NEG) when the door is opened and the interior light is on. This
wire will register positive voltage when the door is closed and the interior light is off.
Connect the GREEN/VIOLET wire to the vehicle’s negative door input wire(s).
NOTE: Certain vehicles may require multiple connections. Refer to vehicle application guide
Battery Power (RED)
Locate 1 of the vehicle’s constant 12 Volt battery wires at the ignition switch.
Verification: This wire will register voltage in all positions of the ignition switch.
Connect the RED wire to the constant 12 Volt battery wire.
Note: Remove the 3 Amp fuse until all connections are made.
Parking Light Output (+/-) (WHITE) Parking Light Polarity (WHITE/RED)
Locate the vehicle’s parking light wire at the vehicle light switch.
Verification: This wire will register positive voltage or ground when the vehicle parking light switch is turned
to the ON position.
These wires are the COMMON and NORMALLY OPEN contacts of the on-board parking light relay. If the
vehicle's parking lights are a +12 volt switched system, connect the RED/WHITE wire to a fused +12 volt
battery source, and connect the WHITE wire to the vehicle's parking light wire. If the vehicle's parking lights
are a chassis ground switched system, connect the RED/WHITE wire to a chassis ground source, and
connect the WHITE wire to the vehicle's parking light wire.
(12 páginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais