6
SETUP & PROGRAMMING - LOT MODE
Lot Mode Transmitter Programming Bank 1 (3 Chirps)
1. Turn the ignition ON.
2. Press and hold the override button.
3. Within 10 seconds the system will chirp (3) three times.
4. Enter the desired VEHICLE NUMBER into the ACM keypad and then press the LOCK button.
5. The system will respond with 1 chirp.
6. Pressing the override button at anytime during programming will advance to the next bank.
Note: This system has 1 button programming which programs all channels of the transmitter to the
system at once.
When an ACM keypad is programmed to the system, it is automatically transitioned into Lot Mode.
Only 1 vehicle number may be learned to the system.
Lot Mode Feature Programming Bank 2 (4 Chirps) - No ACM Transmitter
1. Turn the ignition ON.
2. Press and hold the override button.
3. Within 10 Seconds the system will chirp (3) three times.
4. Use the override button to advance to feature programming bank 2 which is (4) four chirps.
5. Use the override button to scroll through the selections in the feature bank, the system will chirp to
match the feature number.
6. Press the programming button on the module to change the desired feature. The LED will flash
indicating the changed feature.
Consumer Mode Feature Programming Bank 2 (4 Chirps) - With ACM Transmitter
1. Turn the ignition ON.
2. Press and hold the override button.
3. Within 10 Seconds the system will chirp (3) three times.
4. Use the override button to advance to feature programming bank 2 which is (4) four chirps.
5. Use the CAR FIND/PANIC button to scroll through the selections in the feature bank, the system will
chirp to match the feature number.
6. Press the LOCK button to change the desired feature. The LED will flash indicating the changed
feature.
Defaulting the Features in Programming Bank 2
1. Turn the ignition ON.
2. Press and hold the override button.
3. Within 10 seconds the system will chirp (3) three times.
4. Press the programming button on the module, the system will chirp (4) four times indicating the
features have been defaulted and is now in feature programming bank 2.
NOTE: The system will remain in programming mode as long as the ignition is on, there is no
time limit. To exit programming turn the IGNITION OFF.
(12 páginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais