Code Alarm CA680 Manual do Utilizador descarregar pdf (Página 15)

Negative Unlock Output (GREEN)

Negative Lock Output (BLUE)

Negative Second Door Unlock Output (TAN)

One Wire Positive Multiplexed and One Wire Multiplexed With 2-step Unlock Feature

All Door Lock and Unlock: Locate the lock / unlock wire at the vehicle’s lock / unlock switch.

Verification: This wire will show variable positive voltage when the switch is activated. Please consult the

wire and location chart for specific resistor values for your vehicle.

Driver’s Door Unlock: Locate the unlock motor wire directly from the actuator inside the driver’s door.

Verification: This wire will rest at ground and register positive voltage when the driver’s door is unlocked.

Connect the GREEN and BLUE or TAN wires shown in diagram 14 below using (2) SPDT relays (not

supplied).

Note: When adding the 2 step unlock feature the TAN 2nd door unlock wire will be used to unlock all vehicle

doors on the second press of unlock. This feature must be turned on in programming. An additional

SPDT relay (not supplied) is required. Connect the relay as shown in diagram 15 below to unlock the

driver’s door on the first press of unlock.

3. DOOR LOCKS

Note. Optional Code Alarm door lock interface part # DLRK is available for this application.

87a

GR EE N (-) Unlock Output

To Unlock Side Of

Driver's Door Actuator

Fused +12 Volt

B a tte ry S ource

From Keyless E ntry

Module O r Door

Lock/Unlock Relays

CUT

87a

Fused +12 Volt

B a tte ry S ourc e

Lock

Unlock

Door

Lock Switch

87a

BLUE (-) Lock Output

GREEN (-) Unlock Output

Or TAN 2nd Door Unlock

Output When Ins talling

The 2-Step Unlock Feature

Resistor

Vehicle Door Lock

C ontrol R elays

Diagram 15

Diagram 14

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21 22

Comentários a estes Manuais

Sem comentários

Code Alarm CA680 Manual do Utilizador Página 15

Comentários a estes Manuais

Manuais e produtos relacionados com Alarmes para automóveis Code Alarm CA680