Code Alarm CA680 Manual do Utilizador descarregar pdf (Página 10)

2. 16 PIN MAIN HARNESS CONTINUED

Chassis Ground Source (-) (BLACK)

Connect the BLACK wire to a solid chassis ground point using a ring terminal and self tapping screw

(not supplied). Scrape away paint from the grounding point to ensure a good connection. The

recommended grounding point is a metal surface in the driver’s side kick panel area.

Note: Do not ground the BLACK wire with any other vehicle components.

Unlock Switch Sense (LT. GREEN)

This wire will prevent the system from disarming the security system when a POS or NEG pulse is applied to

it from an external device. This will prevent the system from disarming if it is pulsed at the same time as the

BROWN (Manual Disarm Input) wire.

For example: To prevent the system from disarming from the switch on the door. Connect this wire to the unlock

switch or passenger unlock motor wire

NOTE: Only required if using the factory keyless entry transmitter to ARM/DISARM this system.

Manual ARM input (WHITE/BLUE)

This wire will ARM the security system when a POS or NEG pulse is applied to it from an external device such

as the vehicle's factory lock motor wire.

12 volts Ignition Input (PINK)

Locate the vehicle’s ignition wire at the ignition switch.

Verification: This wire registers voltage when the key is turned to the ON (or RUN) position. The voltage

does not drop out when the key is turned to the START (or CRANK) position.

Connect the PINK wire to the vehicle’s Ignition wire.

Instant Trigger Input (-) (BLUE/WHITE)

This wire is a GROUND input for an external sensor or secondary pin switch.

Verification: This wire when connected will trigger the security system

Horn Output (-) 1Amp (BROWN/BLACK)

Locate the vehicle’s horn wire at the steering column.

Verification: This wire will register at positive voltage and register ground when the horn switch is

pressed.

Connect the BROWN/BLACK wire to the vehicle’s horn wire.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 21 22

Sem comentários

Code Alarm CA680 Manual do Utilizador Página 10