Code Alarm 4000 Manual do Utilizador descarregar pdf (Página 5)

Getting The Main Panel Running

If you have the optional printer fitted make sure that the printer paper is not being held firm by an

elastic band or piece of string.

Note that if external sub-panels are not powered up and if the battery has not been connected the

Main Panel WILL report faults when it is powered up. This is entirely normal. When this happens

silence the buzzer by pressing ALARM SILENCE.

Apply AC power to the Main Panel.

The LCD should display the software version and the message ‘INITIALISING’. This will be followed by

the date and time (and the company name if it has been set). Within a few seconds faults will be

reported, these will overwrite the date and time (and company name).

The SYSTEM ON LED on the fascia of the panel should be flashing green. This indicates that the

system is in Installation Mode. If the LED is solid green the system is in Active Mode and needs to be

put into Installation Mode - refer to the programming section for details on how to do this.

If the SYSTEM ON LED is flashing and information is being displayed on the LCD then the Main Panel

is functional.

If the PROC FAULT LED is lit and a continuous tone is audible then remove power and confirm that

the SIM CARD is fitted correctly.

COMMISSIONING

1 2 3 4 5 6 7 8 9 10 ... 22 23

Sem comentários

Code Alarm 4000 Manual do Utilizador Página 5