Code Alarm Professional Series CA 1050 Manual do Utilizador descarregar pdf (Página 15)

20.2 Troubleshooting Table

SECURITY CODE MACHINE BEHAVIOUR ERROR DESCRIPTION POSSIBLE INTERVENTION

Traction Pause The traction is blocked. The electronic control circuit

overheats to > 85°c.

If the atmospheric temperature

is high, stop the machine for

20 minutes and then restart it.

if the problem persists, call the

service centre.

Brush Current The operating functions stop. Excessive power draw or

central brush lock.

Check the brush runs smoothly

and check for any impediments

(string, nylon or other).

Battery Reserve Warning that the battery is

almost at.

This happens when the battery

voltage falls below 21v.

No intervention required other

than charging the battery.

Flat Battery The machine functions all

stop with the exception of the

traction.

If for 3 consecutive seconds the

voltage read by the key is less

than 20, 3v.

Recharge the battery.

Battery Worn Out The machine is blocked. If for 3 consecutive seconds the

voltage read by the key is less

than 18v.

Recharge the battery.

Brush Worn Out The machine continues to run. The brush no longer applies

suitable pressure to the oor as

it is worn out.

Replace the central brush.

1 2 ... 10 11 12 13 14 15 16

Sem comentários

Code Alarm Professional Series CA 1050 Manual do Utilizador Página 15