Code Alarm CA680 Manual do Utilizador descarregar pdf (Página 8)

2. BASIC INSTALLATION - 16 PIN MAIN HARNESS

Starter Input (Key Side) (PURPLE/RED) / Starter Output (Motor Side) (PURPLE)

Locate the vehicle starter wire.

Verification: This wire registers voltage only when the key is turned to the START position. Cut the vehicle's

starter wire in half.

Verification after starter wire is cut:

• KEY SIDE of starter wire registers voltage when the key is turned to the START position.

• MOTOR SIDE of starter wire registers no voltage.

Connect the PURPLE/RED wire to the KEY SIDE of the vehicle starter wire at the ignition switch harness.

Connect the PURPLE wire to the MOTOR SIDE of the vehicle starter wire.

1. 2 PIN STARTER KILL HARNESS

Negative Unlock Output (GREEN)

Negative Lock Output (BLUE)

Refer to the door lock section of this manual.

Trunk Release Output (-) (TAN)

This wire provides a 500mA negative output capable of driving relays. For Control of optional accessories

such as trunk release.

To Activate press and hold UNLOCK for 2 seconds.

Locate the vehicle’s trunk release wire at the trunk release switch.

Verification: This wire will register either positive voltage or ground when the trunk release is activated.

Optional Programmable Settings: This output can also be used for 2nd step unlock, Illuminated Entry, or ITS

Function.

Note: Changing this to ITS Function changes the functionality of the entire system, refer to the MM1 ITS

Functionality section of this manual.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 21 22

Sem comentários

Code Alarm CA680 Manual do Utilizador Página 8