Code Alarm 3000 Manual do Utilizador descarregar pdf (Página 32)

System Testing

You can test the components of the system—the sirens, the telephone

hook-up, and the sensors—without causing a false alarm. This section

describes how you can be sure that the system is functioning properly.

Important Notice: Test Weekly

Your Protective Service Agreement requires you

to conduct these tests every week.

Siren and Transmission Test

This test helps to ensure that the system’s siren is working properly, and

that the system is able to send an alarm signal to the Brink’s Monitoring

Center. You will not receive a call from Brink’s.

To test the system’s siren and transmission, do the following:

1. Press the OPTIONS

key.

TEST

2. Press the 5 key.

The ENTER CODE

light blinks.

TEST, ENTER

CODE

1. Press the OPTIONS

key until the

message window

reads: TEST,

ENTER CODE.

3. Enter your code.

A test signal is sent

to Brink’s. If it is

received, the siren

sounds briefly. The

keypad may also

beep. All zone lights

blink.

2. Enter your code.

The display reads:

TEST. A test signal

is sent to Brink’s. If it

is received, the siren

sounds briefly. The

keypad may also

beep.

4. If you do not hear

the beep or blast,

and the TROUBLE

light turns on, the

test failed. Call

1-800-445-0872.

3. If you do not hear

the beep or blast,

and the keypad

message window

reads CP TROUBLE,

the test failed. Call

1-800-445-0872.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 53 54

Comentários a estes Manuais

Sem comentários

Code Alarm 3000 Manual do Utilizador Página 32

Comentários a estes Manuais

Manuais e produtos relacionados com Alarmes para automóveis Code Alarm 3000